Шківи з підшипниками, або без
Шківи з підшипниками, або без
- Виготовлені та зварні шківи
- Стандартні ламіновані та ковані
З можливістю поставки шкивів у вузлах з підшипниками, в т.ч INA (SL,51…).
“C” FORM SHEAVES (WELDING-MACHINED)
| RANGE OF SIZE CAPACITY | MATERIAL (STEEL) | STANDARD MINIMUM HARDNESS of the ROLLING ROPE |
| from diam. 450 mm up to 1300 mm (D3) | St- 52.3 | 180-200 HB |
- CAPACITY (Ton) of the SHEAVE
- DIAMETER (mm) of the SHEAVE ( D3 )
- ROPE DIAMETER (mm) ( R )
- CENTRAL PART INSIDE DIAMETER (mm) ( D1 )
CENTRAL PART inside DIAMETER (mm) ( d )
| Drawing Ref. | Range of dimensions (mm) | ||||
| Ref. A ø see drawing | ø 160 | ø 200 | ø 280 | ø 355 | ø 450 |
| Ref. B ø see drawing | ø 192 | ø 240 | ø 335 | ø 415 | ø 520 |
| Ref. Cø see drawing | ø 95 | ø 109 | ø 140 | ø 186 | ø 220 |
| Ref. D ø see drawing | ø 75 | ø 85 | ø 110 | ø 150 | ø 180 |
| Ref. E see drawing | 35 | 41 | 48 | 60 | 72 |
| Ref. F see drawing | 30 | 33 | 44 | 48 | 60 |
| Ref. G see drawing | 4 | 5,5 | 8 | 9 | 12 |
| bearing | 6009-2RS | 6209-2RS | 6212-2RS | 6217-2RS | 6220-2RS |
| bearing inside ø | ø 45 | ø 45 | ø 60 | ø 85 | ø 100 |
Useful information for the Manufacturer:
- CAPACITY (Ton) of the SHEAVE
- DIAMETER (mm) of the SHEAVE ( a )
- DIAMETER (mm) of the ROPE in relation with ( g )
- CENTRAL PART inside DIAMETER (mm) ( d )
